HMD controllers

When exploring EON-XR Xperiences using an HMD device you can use the controllers to interact with, navigate around, and adjust the position of the object.

The buttons on the controllers are numbered from 1 to 3, Left (L1, L2, L3), and Right (R1, R2, R3). The controller design differs depending on which HMD you are using. For details about controller design, refer to Oculus Rift, Quest 1, and Quest 2 or HTC Vive series.

For information on available features and limitations when exploring EON-XR through HMD, refer to Features.

Oculus Rift, Quest 1, and Quest 2

  • L1/R1 - Thumb sticks

  • L2/R2 - Trigger buttons

  • L3/R3 - Grip buttons

Oculus controller, left, right, L1, L2, L3, R2, R3, R1

HTC Vive series

  • L1/R1 - Trackpads

  • L2/R2 - Trigger buttons

  • L3/R3 - Grip buttons

HTC Vive controller, left, right, L1, L2, L3, R2, R3, R1

Controller mapping

L1

  • Walk forward, backward, or sideways

  • Fly in the direction pointed to by the indicator (Up / Down)

  • Press - Switch between Fly and Walk mode

L2

  • Press - UI selection

L3

  • Press and hold - Scale the object (+/-) by moving sideways, while scaling mode is active and pressing R3

R1

  • Point to the Library menu - Scroll in the menu

  • Point to the ring at object base - Rotate the object

  • Press - Traverse through the object hierarchy

R2

  • Press - UI selection

  • Press and hold - Grabs object part, if pointed to a part

  • Press and hold - Grabs base, if pointed to the ring at object base

Hint

You can grab the object to move a certain part, or grab the base to move the entire object.

R3

  • Press and hold - Scale the object (+/-) by moving sideways, while scaling mode is active and pressing L3

  • Press and hold - Grab the slicer grid, while pointed to the slicer grid